www.avenview.com
7
1.8
Installation
To setup Avenview SW-HDSDI-8X1 follow these steps for connecting to a device:
1.
Connect SDI enable equipment’s to the output of SW-HDSDI-8X1
2.
Connect the SDI input sources to the inputs of SW-HDSDI-8X1
3.
Plug power adapter cable into 5V DC power jack of SW-HDSDI-8X1
4.
Use IR Remote, RS232 or front panel push button to switch between inputs.
1.9
Operation and IR Control
Channel 1
Channel 2
F1
Channel 3
F2
Channel 4
F3
Channel 5
F4
Channel 6
F5
Channel 7
F6
Channel 8
a.
Use
or
keys to select input source, and
wait a few seconds for video of next channel coming out after
the channel switch command is sent.
