1. Learn the EDID from a HDMI display to the HDMI input manually
1. Connect the display device to the EDID Recorder via
HDMI DISPLAY 2
.
2. Plug in the 5V DC power supply unit.
3. Set SC-HDM2-T4KHD
to the mode 7.
4.
The unit can remain at mode
7 until
the
next
EDID
learn
from another monitor
.
2. Recall the EDID from a HDMI display or user defined EDID data via software
1. Set SC-HDM2-T4KHD
to mode 0.
2. Connect the display device to the EDID Recorder via
HDMI
on the
Display
.
3. Plug in the 5V DC power supply unit.
4. Connect the SC-HDM2-T4KHD
to PC via USB cable
5. Click on “Read EDID from Monitor 1” or “Read EDID from Monitor 2” button or load the user defined EDID
data.
6. Click on “Write EDID into Device”, the EDID from display will be written to SC-HDM2-T4KHDdevice on
mode 0.
7. Hold the mode at 0 until next update the EDID process.
7
.
APPLICATION DIAGRAM
8
.
INSTALLATION
www.avenview.com
Page
6
