NOTE
You must
ensure your PC is on the same subnet as the
SPLITPRO
by following these steps
.
These are default vaules, your network configuration may require different values.
1
.
Clic
k
Start
menu
,
go to
Control
Panel >
Network and Sharing center >
Change Adapter Settings >
Local
Area Connection.
Right click and choose
Properties.
C
heck
Use the following IP
address
,
,
enter
192.168.1.x
(i
f
f
unsure use
192.168.1.5
)
E
nter
subnet mask
number
255.255.
255
.0
. Default
Gateway 192.168.1.1
C
lick
OK
, then click
OK
again.
H
ighlight
Internet Protocol
Version 4 (TCP/IPv4)
then
click
Properties
3
.
2
.
M
ake sure all de
v
ices are connected to the network and powered up.
9
Minimum System Requirements for PC Software
Operating System: Microsoft® Windows® XP, Windows® Vista, Windows® 7 or Windows® 8
CPU: 1.5 GHz
Memory: 1 GB of RAM
HDD: 32 GB of available hard disk space
Network: 10/100 NIC
IC
You can control all aspects of your
SPLITPRO
through the
T
elnet
C
ommand
-L
ine
interface
www.avenview.com
5.1.
2
Configuring Your Network Settings
Rev. 00 11/2017
