www.avenview.com
Page
10
1. Connect the Transmitter module to the
HDMI
source device.
2. Connect the Receiver module to the display.
3. Connect a single strand multi-mode SC terminated optic fiber (50/125um) from the Transmitter to the Receiver module.
4
. Connect the in5V DC power supply into the Receiver.
5
.
Green
L
ED indicator on the modules will light up after all connections are completed.
6
.
OPTICAL FIBER
HAZARD
•
P
ersons installing fiber optic products must take all necessary safety precautions, such as wearing protective clothing and
goggles and observing warning signs.
•
To ensure that the required personnel and equipment is properly installed, secure from unnecessary failure of the
components or failure of the whole system, injury to one’s self and in addition to legal responsibility; everyone is
responsible for his own health
•
K
eep exposed optical fiber ends away from skin and eyes.
•
The waste fragments should be treated with care and not picked up with bare hands, but rather with special gloves.
•
Dispose of waste in a suitable container via an approved agency. Make sure that the quantity of optical fiber waste is
minimized.
•
Closures containing termination points for optical fiber cabling must be labeled with appropriate warning signs or clearly
visible text.
•
Make sure that the quantity of optical fiber waste is minimized. Closures containing termination points for optical fiber
cabling must be labeled with appropriate warning signs or a clearly viewable text.
•
There are four l aser Classifications based on risk levels. l aser manufacturers are required to label their lasers accordingly.
5.3
Installation Steps
