www.avenview.com
5
1.7
Installation
This product is composed of a Transmitter and a Receiver. The Transmitter should be connected to the
computer’s DVI Port and the Receiver should be connected the DVI Port of the digital display device.
Avenview FO-DVI-1000M-EMIX Transmitter / Receiver is designed to be used with SC type standard optical
cable (Multi-Mode optical fiber: 50/125, 62.5/125um).
Avenview FO-DVI-1000M-EMIX is designed to self-detect the resolution of the monitor and change the
resolution accordingly. Follow these steps for connecting to a device:
1.
Power on your Display
2.
Connect Transmitter to the DVI Source and Receiver to the Display.
3.
Connect the optical fiber between Transmitter and Receiver.
4.
Connect DC power to the Receiver
5.
Restart the computer.
1.8
Troubleshooting
Problem
Possible Solution
No Image
Check if the PC Power is on
Check if connection to the computer and the monitor are
correct.
Turn the PC Power off and on again.
Screen Defects Appear
This product supports up to WUXGA resolution.
Check the maximum resolution range of the graphics card.
