www.avenview.com
4
1.3
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4
Introduction
FO-DP-300M-EMI, Optical DISPLAY PORT extension module,
This unique fiber optical transceiver let your display device extend up to 300 meters (1000ft) away from
host based on Display Port standard without signal degradation at WQXGA (2560X1600)
resolution.
High Speed and long distance transmission by optical system
Compatible with Display Port standard V1.1a
Main-link video signal / AUX data and Hot Plug Detection signal is transmitted by 1ch
multi-mode fiber
DPCD compliant (No support HDCP mode)
External Power supply
1.5
Package Contents
Before you start the installation of FO-DP-300M-EMI, please check the package contents.
-
Transmitter
x 1
-
Receiver
x 1
-
Power Adapter (5VDC, 2A)
x 1
User’s Manual
x 1
1.6
Before Installation
Put the product in an even and stable location. If the product falls down or drops, it may cause
an injury or malfunction.
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C)
or high humidity.
Use the DC power adapter with correct specifications. If inappropriate power supply is used
then it may cause a fire.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
