Page|9
www.avenview.com
4.
INSTALLATION (DVI-C5-M-SET)
To setup Avenview DVI-C5-M-SET please follow these steps for connecting to a device:
1.
Turn off all devices including monitors / TV.
2.
Connect a CAT 5/6 UTP/STP cable between the two DVI-C5-M-S/R & DVI-C5-M-R/S.
3.
Connect to a HDMI /DVI source.
4.
Power on the DVI display.
5.
Power on HDMI/DVI Sources.
6.
Also can be connected with DVI-C5-M-R to compatible devices listed below with a CAT5E/CAT6
cable-:
-
HDM-C5XD-SR
-
HDM-C5SP-8SR
-
HDM-C5-3-R
-
DVI-C5-M-R
5.
EXAMPLE INSTALLATION FOR EXTENDED DISPLAY (HDM-C5XD-SR)
To setup optional Avenview HDM-C5XD-SR please follow these steps:
1.
Turn off all devices including Monitors /HDTV.
2.
Connect a Local HDMI display to the HDMI out of the HDM-C5XD-S and then connect a
Receiver/Speaker to the 3.5mm audio socket.
3.
Connect a Ethernet (UTP, STP) cable to CAT5 IN which is connected to CAT5 OUT on
DVI-C5-M-S/R.
4.
Plug in 5V 4A DC Power (supplied).
5.
Power on the HDMI display.
6.
Power on HDMI Sources.
NOTE:
SEE APPLICATION DIAGRAM ON PAGE 7
