9
CHANNEL
SELECTION
Both the transmitter and receiver must be set to the same channel. On the inside of the
transmitter and the receiver, you will find an 8-Channel rotary switch. Choose desired
channel and set the rotary switch accordingly. Ensure both the transmitter and receiver
have the same channel settings.
FIGURE C
VIDEO GAIN ADJUSTMENT
FIGURE D
VIDEO
LOSS
LED
INDICATOR
Transmitter
: If the Yellow LED video loss indicator is
ON
-
the transmitter is not receiving video from the camera. Check
your video source, cables and connections to the transmitter.
FIGURE E
Receiver
: If the Yellow LED video loss indicator is
ON
– no video is being received from
the transmitter.
** Confirm that both the transmitter and receiver are set to the same channel
** There may not be enough RF signal for the receiver to demodulate the video
Frequency Frequency
CH # 1
5.733 GHz
CH # 5
5.809 GHz
CH # 2
5.752 GHz
CH # 6
5.828 GHz
CH # 3
5.771 GHz
CH # 7
5.847 GHz
CH # 4
5.790 GHz
CH # 8
5.866 GHz
The system has been carefully calibrated by the factory, however
video gain adjustments may be made if required. Contact
$YHQWXUD
Technologies Technical support for assistance.
FIGURE B
FIGURE C
FIGURE D
FIGURE E
FIGURE A
