Page
3
of
7
Chapter 1
–
INTRODUCTION
This manual will address dimensions and the features of the TS-TTS01 turnstile while also
covering the process in which this turnstile is installed.
1.1. Product features
The TS-TTS01 tripod turnstiles have the following features:
-
Material: standard 304 stainless steel with the option of getting 316 stainless
steel.
-
Arms: manual, semi-automatic or fully automatic:
o
Manual: when power is off, the arms will not lower.
o
Semi-automatic: when power is off, the arms will lower. The arm will not
return to the original position when power is restored.
o
Full-automatic: when power is off, the arms will lower. When power is
restored, the arms will return to the original position.
-
Optional: stainless steel bolt-on wheel kit.
-
Customized reader cut-out or barcode reader insert.
1.2. Product specifications
The TS-TTS01 tripod turnstiles have the following characteristics:
-
Power requirements: 110Vac [220Vac], 250W to 500W. The tripod turnstiles are
provided with different power supplies, based on country and customer’s
requirements. Check the product label before connecting to any power supply.
-
Driver motor: 24Vdc, max. 40W
-
Output interface: 12Vdc
-
Communication interface: RS485
-
Operating temperature: 14°F to 122°F [-10°C to 50°C]
-
Operating humidity: 20% to 95% RH non-condensing
