aventon POWER SHARE CTS36ABU1, Original Instruction Manual

Page: 8 / 31

4
. ASSEMBL
Y
1. Rem o ve the scooter from the packaging box.
Move the kickstand out. With one hand on the pole and
one hand on the deck, place the scooter on the ground.
It should stand on its own with the kickstand out.
2. Unfold the pole and push it until you hear a click.
Confirm that it is fully locked into place and the safety
lock pin is secured completely.
3. Firmly connect the wires inside the handlebar and the
pole. Slide the handlebar onto the pole. Be aware of the
correct orientation.
4. Tightly install the 4 screws with the included hex wrench.
5. Unlock the battery compartment underneath the deck
with the key provided.
6. After fully charging your Power Share batteries, insert
both batteries into the battery compartment.
Safety Lock Pin
WARNING!
Keep plastic covering away from children to avoid suffocation.