Aventics PROFINET-IO, Operating Instructions Manual

Page: 88 / 348

Commissioning and Operation
88 AVENTICS | PROFINET-IO | R412015162–BDL–001–AE
Fig. 6: (A) S3.1–S3.8 monitoring threshold for valve voltages
(see Table 19 on page 92); (B) switch S4, S5, S6, S7 for
assignment of valve supply voltages (U
Q1
, U
Q2
) on bus coupler
with M12 plug (see Table 16 on page 88)
On a bus coupler with 7/8" plug, the valve power supply is via
a push-in fitting (see B in Fig. 7). The valve supply assignment
cannot be set here on the bus coupler.
Fig. 7: (A) S3.1–S3.8 monitoring threshold for valve voltages (see
Table 19 on page 92); (B) 7/8" push-in fitting for valve power
supply
This switch allows valves to be assigned in groups to supply
voltages U
Q1
and U
Q2
. When delivered, all valves are assigned
to the U
Q1
voltage.
B
A
S4
S5
S6
S7
U U
12
34
5
6
U
On Off
Q2
U
Q1
S3.8
S3
S3.7
Off
On
1 2
Q1 Q2
B
A
12
34
5
6
U
On Off
Q2
U
Q1
S3.8
S3
S3.7
Off
On
1 2
Table 16: Assignment of the S4, S5, S6, and S7 switches
Switches Byte
Double subbases for double solenoid
valves (solenoids 12, 14) Double subbases for single solenoid
valves (solenoid 14)
S4 0 1 – 4 1 – 8
S5 1 5 – 8 9 – 16
S6 2 9 – 12 17 – 24
S7 3 13 – 16 25 – 32