Disassembly and Exchange
AVENTICS
| PROFINET-IO | R412015162–BDL–001–AE
105
English
7
Disassembly and Exchange
You can either exchange the bus coupler or connect additional
input/output modules and module extensions as needed.
The AVENTICS warranty only applies to the delivered
configuration and extensions taken into account in the
configuration. The warranty no longer applies after a
conversion that exceeds these extensions.
7.1
Exchanging the bus coupler
O
1.
Disconnect the electrical connections from the bus coupler (
4
).
2.
Unscrew the end plate (
2
) and (if applicable) all input/output
modules left of the bus coupler (each with 2 DIN 912 – M4
hexagonal socket-head screws (
1
), wrench size 3) and
remove from the tie rods (
5
).
3.
Remove bus coupler (
4
) from the tie rods (
5
).
4.
Push the new bus coupler (
4
) onto the tie rods (
5
).
5.
Make sure that
– the tie rods (
5
) have been completely screwed in and
– the seals (
3
) have been inserted correctly.
6.
Push the input/output modules (if applicable) in the original
order and then the left end plate (
2
) onto the tie rods (
5
) and
screw into place (each with 2 hexagonal socket-head screws
DIN 912 – M4 (
1
), wrench size 3).
CAUTION
Applied voltage and high pressure!
Danger of injury from electric shocks and sudden pressure
drops.
O
Make sure the system is not under pressure or voltage
before you exchange the modules.
Summary of Contents for PROFINET-IO
