Aventics CONTROLAIR HG-2 Service Information Download Page 11

Page 11 

Repair Kits for HG-2 Controlair

®

 Valves

New Part No. 

Old Part No. 

Quantity 

Per Valve 

Description 

R431003895 

P -055687-00000 

Note 1 

Minor Graduating Valve Portion-Repair Kit 

Includes items 25, 29, 34, 35, 36, 37, 39 & 42 

R431004005 

P -057136-00000 

Note 1 

Major Graduating Valve Portion-Repair Kit 

Includes items 2, 3 & 18 and kit R431003892 

R431003743 

P -055474-00002 

Minor Side Valve Portion-Repair Kit 

Includes item 7 cartridge with “O” Rings 

R431003985 

P -057094-00001 

Major Side Valve Portion-Repair Kit 

Includes snap ring, screen kit R431003741 

R431006521 

P -064894-00002 

Notes 1,2,3 & 4 

Complete Repair Kit for Control Portion - 

Includes (1) kit R431003892 
(2) kits R431003985, items 2, 3,16 & 17

R431000132 

-850187-00000

Note 5 

Friction Brake Kit for FX & FXR Models 

Includes items 47, 48, 49, 50 & 65 

R431006418 

P -064421-00004 

Note 5 

Cam Shaft Kit for FX & FXR Models 

Includes items 51, 52, 53, 54 & 62 

R431006913 

P -066890-k0000 

Pipe Bracket Portion Kit for all Models 

Includes items 1, 2, 3 & 4 

NOTES: 
1.

The inlet and exhaust valve unit Item 34 and exhaust valve seat Item 42 are lapped together to form
a matched set.  Kits that contain these items from the factory include matched sets.

2.

Select replacement range control spring from identity schedule on page 7.

3.

All kits above include small tubes of the recommended lubricants.

4.

Valve portion kits listed above contain the seals and other parts that are needed too repair the valve
portion.

5.

Replace all worn or damaged components, especially in the mechanical portions of the valve.  The
mechanical parts are listed on pages 7, 8 and 9.

Summary of Contents for CONTROLAIR HG-2
















Reviews: