2
1.
Important safety information
•
Place the laminator on an easily accessible, level, dry, heat resistant and sufficiently
stable work surface. Do not place the laminator on the edge of the work surface.
•
The maximum thickness of the paper and the lamination film is 100 Mic. The thickness
of the laminating film is 80-100 Mic. In case, lower or higher thickness than specified,
the laminating film may be squeezed and bubble formation. If it happens, please turn
off the laminatorand remove the laminating film.
•
Never insert metallic objects (e. g. paper elips, staples etc.) or objects other than
laminating pouches which are intended for this laminator into the laminating pouch
infeed slot.
•
Never laminate damp documents or organic objects (e.g. flowers, leaves etc.).
•
Make sure that children do not insert any objects into the laminator. The device is not a
toy!
•
Keep the laminating set away from pets.
•
Do not leave the laminator unattended while it is operating and do not perform any other
activities du ring operation.
•
Always switch the laminator off and pull the mains plug out of the socket when you are
not using the laminator, cleaning it or in the event of a fault.
•
Do not cut the laminating pouches into pieces before laminating and do not in any case
cut off the sealed edges from the laminating sheets.
•
DO NOT insert the open end of the film into the machine to prevent it from winding
inside the machine.
•
After 30 minutes of lamination, a 30-minute break is recommended.
•
The laminator will become hot during operation. You may burn yourself.
•
Always let the laminator cool off completely before you clean it.
•
If an object (sleeves, tie etc.) is unintentionally taken into the laminating pouch infeed
slot, immediately disconnect the mains plug.
•
WARNING:
Limitation of the possibility of electric shock:
①
Do not use in a humid places. The device is intended for indoor use only.
②
Do not remove the outer cover of the device or try to repair the device yourself.
③
Avoid contact of the power cord with hot surfaces.
④
Unplug the appliance when not in use or before handling.
Due to the constant development of technology, the functions of the product may differ.
The product and all accessories described in this documentation are subject to continuous
improvement and further development. For this reason, we reserve the right to change the
components, accessories, technical specifications and related product documentation
described in this documentation at any time without prior notice.
2
.
Exemption from liability
