Chapter 3: System Operation
KXL System Operator’s Manual,
Rev G
3-12
Figure 3-14. Treatment Screen
3.11 Monitoring Treatment
Check continuously that the area of interest on the cornea is illuminated with the UVA
light all the time and adjust as necessary using the wireless remote.
The patient has to fixate on the center of the light beam aperture throughout the
treatment.
Patients should remain still during the treatment.
3.12 Stopping a Treatment
The treatment stops automatically after the user-programmed timer expires.
The user may decide to stop or interrupt the treatment. In such case, the UV light can be
switched OFF by pushing the
Pause
button.
Figure 3-15. Treatment Paused Screen
To cancel or resume treatment press appropriately. See section 3.14 if canceling a
session.
