5
6
.
TAPE OUTPUT/REC
2. LINE INPUTS
7
.
MP3 PLAYER
This procedure allows you to quickly play an mp3
song stored in the mass storage system(USB).
1.plug the USB cable in to your computer.
See the following section regarding mps upload.
2.Push the Play/Pausec
Buton to play the first mps song of the mass
storage medium.Led blinks during music play.
3. Next/ Plus:to change a music track or
change a control level.
4. Repeat:to Repeat the somg is playing.
7
5
4
6
8
3
This 1/4" TRS stereo jack will drive any standard
headphone to very loud levels.Walkperson-type
phones can also be used with an appropriate adapter.
If you’re wiring your own cable for the PHONES
output,follow standard conventions:
3
.
PHONES
4. AUX SEND
These 1/4'' TRS output connectors provide
balanced or unbalanced line-level signals for
connecting to the inputs of effects devices or
stage monitor amplifiers.
the outside world. Connect them to the balanced
inputs of a power amplifier or powered speakers.
See page 16 for details of the main mix.
These
low-impedance outputs are fully balanced
and capable of d4 dBu lines with up to
28 dB ofheadroom. This output is 6 dB hotter than
other outputs.
These
line-level outputs connect the main mix to
8. MAIN OUTPUTS
5
.
AUX RETURNS
This is where you connect the output of your par
-
allel
effects
devices
(
or
extra
audio
soures
).
These
balanced
inputs
the
circuits
will
handle
stereo
or
mono
,
balanced
or
unbalanced signals
,
either
instrument
level
.
They
can
be
used
with
just
about
any
pro
or
semipro
effects
device
on
the
market
.
The suigbals com-ing into these inputs can be adjusted
using the STEREO RETUN knobs before passing onto
the main mix bus.
6
mixer, its power jack accepts a standard 3-prong
IEC cord like those found on most professional
recorders musical instruments, and computers.
Just in case you lose the cord provided with the
9
.
POWER
SWITCH
10
.
POWER
CONNECTION
9
10
Mono Channels
The
mono
channel
controls
affect
both
the mono mic input and the mono line-level
input.
The gain knob adjust both mic and line
input.
Each mono channel has an insert jack and
low cut switch.
Channel 1 has a hi-z switch to connect a
guitar directly.
The 3-band EQ has shelving high,shelving
low,and peaking mid EQ.
“U”LIKE UNITY GAIN
Theye mixers have a “U” symbol on almost
every level control.This “U” stands for “unity
gain,” meaning no change in signal level(0 dB
gain).Once you have adjusted the input signal
with the gain control,set every control at “U”
and the signals will travel through the mixer at
optimal levels.What’s more,all the labels on our
levels cotrols are measured in decibels(dB),so
you’ll know what you’re doing levels-wise if
you choose to change a control’s setting.
Channel Strip Description
11.GAIN
11
K
Summary of Contents for Strike-FX6
Page 7: ...11 The 12...
