manualshive.com logo in svg

AVE RegCom-Pro, Operation Manual

Share
Download
AVE RegCom-Pro Operation Manual Download Page 56

56

Once connected then click “Remote” and will display “Accessed” or  will go back to “No Access” if the baud rate or cable
connection is not proper and will also go back to “Not Connected” so you can reset the communication settings.

 RegCom-Pro  POS / Cash Register Interface

Note:

   If the cable is disconnected, RegCom-Pro  powered down, PC program closed, the PC and/or the RegCom-Pro

has a 30 second timeout and will reset itself for normal operation.

4. PROGRAMMING

Figure 110: PC and RegCom-Pro Can Establish a Communication

Once you have “Access” then you can do any function on this menu screen. “Upload” data which reads the current
settings of the RegCom-Pro  into the PC. “Download” which sends the PC settings to the RegCom-Pro. “Set Time” can
set a new time or PC sync time to the RegCom-Pro. “Load History” reads the History File of Exceptions from the
RegCom-Pro and saves as a text file on the PC.

Summary of Contents for RegCom-Pro





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands