TCPIP232 Connections
1. Stand Alone with Digital Video Recorder
This connection will inteface directly to a DVR which supports Text Insertion. This in-
sertion will interface via RS232C from TCPIP232 rear panel.DVR RS232 communication
setting to be baud rate 19200,N,8,1 Flow control NONE
.
So Please consult your DVR manual
or contact the DVR manufacturer. The TCPIP232 is programmed by a laptop.
TCPIP232 ATM/POS
The TCPIP232 Interface is designed to capture ATM or POS transactions on a Ethernet
LAN system and then convert captrued transactions to a serial port to interface with VSSI-
Pro (ATM Synchronous Serial Interface), VSI-Pro Max or VSI-Pro to overlay the text on the
video and export the data in formated ASCII to other devices like a DVR. It also allows full
programming of the TCPIP232 via on-screen interative menu of the above devices.
When used standalone or connected to a DVR, programming is done via any laptop running
HyperTerminal or other communications program. Default is MDI/MDIX but can be jumper
configured for Tap or Mirror Modes.
7
Figure 2. VSSI-Pro Interface
RS-232
Figure 1. Stand Alone Connection
AT M
Camera
Rounter/Network
Switcher
CAT-5
CAT-5
Video Coaxial
Video Coaxial
Serial
DVR
TCPIP232
Monitor
RS-232
CAT5 LAN
2. VSSI-Pro Interface
The VSSI-Pro also supports text insertion and programmable gray scale and back-
ground of text insertion. Users are able to define the ATM IP Address via Onscreen program-
ming on VSSI-Pro Menu.
