AVE Allumia 443016S Series, Operating Instructions Manual, Page: 40 / 115

ENGLISH 38
1.1.3 MONOSTABLE / BISTABLE
For (non roller shutter) ON/OFF type controls, it is possible to choose that the operating mode be monostable
or bistable (stepper).
IN this case too, programming is done in sequence for each column. The LEDs for the columns not already
chosen for the roller shutter mode switch on, blue if they are in bistable mode and red for monostable mode
(default). This situation is inverted by touching the individual zone.
In the example below, columns 1 and 3 have already been chosen as sensitive zones for roller shutter mode
(see previous paragraph), and so the sequence begins with column 2.
MONOSTABLE BISTABLE
From the roller shutter / pushbutton menu, push the P1 button once and choose the required function.