Assembly Instructions - Important:
Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when
assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or
information on other products, please visit our website: www.avesix.com, email or write us.
1 (Chair Body) - 1 Piece
2 (Base w/ Casters) - 1 Piece
3 (Pneumatic Cylinder) - 1 Piece
Step 1
A
B
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and pull lever (A) up.
To lower seat height sit on chair and pull lever (A) up.
• LOCKING TILT ADJUSTMENT
For individual comfort, this chair has been equipped with an
adjustment that will allow the user to change the tension of the
tilting feature. Turn knob (B) clockwise to increase tension and
counter-clockwise to decrease or ease the tension. To lock return
chair to the upright position and push lever (A) in. To unlock pull
lever (A) out.
NOTE:
Be careful not to loosen back tilt adjustment knob completely.
3
1
2
