MAIN MENU SETUP GUIDE
User Manual
34
otherwise, it will be considered the start of a new motion file. Click Trigger button, a
dialog box will pop-up:
Step 3:
The setup steps of motion trigger are similar to alarm handling; user can refer
to Chapter 4.5.1 Sensor
alarm handling for more details.
Step 4:
Click Area button, a dialog box will pop-up shown as Fig 4-24:
Fig 4-24 Motion-Area
Step 5:
In the Area interface, user can drag slide bar to set the sensitivity value (1-8),
the default value is 4. The higher the value the higher sensitivity you get. Since the
sensitivity is influenced by color and time (day or night), user can adjust its value
according to the practical conditions; click
icon, set the whole area as detection
area; click
icon, the set detection area will be cleared; click
icon, user can
test whether the sensitivity value and motion area are suitable to current conditions
（
refer to following picture
）
; Click
icon, to save the setting; click
icon, exit
current interface.
Note: when user drags mouse to set motion detection area, they have to
click
icon to clear current detection area first, and then set the area.
Step 6:
User can setup all channels with same parameters, checkmark “all”, then to
do relevant setup.
Step 7:
Click “default” button to restore default setting; click “apply” button to save the
setting; click “exit” button to exit current interface.
②
Schedule
