manualshive.com logo in svg

Avaya WC 8180, Regulatory Information, Page: 17 / 50

Share
Download
Avaya WC 8180 Regulatory Information Download Page 17

Country and plug

description

Specifications

Typical plug

Australia
AS3112-1981 male plug

240 VAC
50 Hz
Single phase

The WLAN Controller 8100 Series does not have a power switch. When you connect the AC
power cord to a suitable AC power outlet, the switch powers up immediately.

Connect the AC power cord to the back of the switch, and then connect the cord to a power
outlet. Ensure that you use the correct power cord for the switch and power supply.

Safety Messages

 Warning:

Installation must be performed by qualified service personnel only. Read and follow all
warning notices and instructions marked on the product or included in the documentation.

 Danger:

This equipment relies on the building's installation for overcurrent protection. Ensure that a
fuse or circuit breaker no larger than 120 VAC, 15 A U.S. (240 VAC, 16 A International) is
used on the phase conductors.

 Caution:

This device is a Class A product. In a domestic environment, this device can cause radio
interference, in which case the user may be required to take appropriate measures.

Safety Messages

Avaya WLAN 8100 Regulatory Information - WLAN Controller 8100 Series 

September 2012     17

Summary of Contents for WC 8180



















































Reviews:

No comments