add trunk-group 83 Page 1 of 21
TRUNK GROUP
Group Number: 83
Group Type: sip
CDR Reports: y
Group Name: SIP
COR: 1 TN: 1
TAC: *83
Direction: two-way Outgoing Display? n
Dial Access? n Night Service:
Queue Length: 0
Service Type: tie
Auth Code? n
Signaling Group: 83
Number of Members: 5
Figure 6: SIP Trunk-Group Form
3.1.3.4
Configure Network Region
Use the
change network-region <x>
command, where <x> is the network region used by the
SIP trunk. Enter the following parameters:
Parameter
Usage
Location
Use a location of “1”, in this example.
Authoritative Domain Use a domain of “ffm.com”, as configured for Avaya SES in
Figure 13
.
Name
Assign a name for identification purposes.
Intra-region IP-IP
Direct Audio
Specify “y” to allow direct connections between IP endpoints.
Table 5: Configuration Parameters for Network Region
change ip-network-region 1 Page 1 of 19
IP NETWORK REGION
Region: 1
Location: 1 Authoritative Domain: ffm.com
Name: FFM
MEDIA PARAMETERS
Intra-region IP-IP Direct Audio: yes
Codec Set: 1 Inter-region IP-IP Direct Audio: no
UDP Port Min: 2048 IP Audio Hairpinning? n
UDP Port Max: 3327
DIFFSERV/TOS PARAMETERS RTCP Reporting Enabled? y
Call Control PHB Value: 46 RTCP MONITOR SERVER PARAMETERS
Audio PHB Value: 46 Use Default Server Parameters? y
Video PHB Value: 26
802.1P/Q PARAMETERS
Call Control 802.1p Priority: 6
Audio 802.1p Priority: 6
Video 802.1p Priority: 5 AUDIO RESOURCE RESERVATION PARAMETERS
H.323 IP ENDPOINTS RSVP Enabled? n
H.323 Link Bounce Recovery? y
Idle Traffic Interval (sec): 20
Keep-Alive Interval (sec): 5
Keep-Alive Count: 5
Figure 7: IP-Network-Region Form
MRR; Reviewed:
SPOC 12/13/2007
Solution & Interoperability Test Lab Application Notes
©2007 Avaya Inc. All Rights Reserved.
7 of 23
FreiTel-SIP
