Avaya S8730, Maintaining Manual, Page: 35 / 64

Tip:
To start the thumbscrew use one hand to push the spring-loaded screw down into
the threaded hole, then turn the screw with the other hand.
3. Replace the Torx screwdriver in the clip at the rear of the server.
Next steps
1. Replace the cover on the server.
2. Replace the server in the rack.
3. Restore power to the server.
Related topics:
Replacing the server cover on page 17
Replacing the server in the rack on page 18
Shutting down the MAS on page 14
Connecting Dialogic port boards
Use the type of cable appropriate to the switch integration to connect the Dialogic port
board to the corporate telephone switching system. The organization responsible for
maintaining the corporate switch must make the connection to the telecommunications
system.
Related topics:
Supported port board connections on page 35
Port board connections on page 36
Supported port board connections
The server supports the following port board connections:
• Analog using a standard RJ-11 tip/ring cord or individual tip/ring cables and a 12–
port harmonica.
• E1–QSIG and T1–QSIG using an RJ-48C Ethernet cable.
• Dialogic Set Emulation (DSE) boards using a D/82U cable.
Connecting Dialogic port boards
Maintaining the Avaya S8730 Server for Modular Messaging June 2009 35