Avaya S8700-Series, Installing And Configuring

Page: 76 / 122

Chapter 7: Postinstallation administration
76 Installing and Configuring the Avaya S8500-Series Server
Verifying the date and the time (main server only)
Use SAT commands to verify the date and time.
1.Type
display time
and press Enter .
2. Verify that the date and the time of day are correct.
If the date and the time of day are correct, go to 5.
If the date and time of day are not correct, proceed to step 3.
3. Verify connectivity to any administered Network Time Server:
a. On the System Management Interface, from the Administration menu,
click Server (Maintenance) .
b. On the left navigation panel, click Network Time Sync . The Network Time Sync
screen confirms synchronization to any administered Network Time Server.
c. Resolve any connection or administration issues related to the Network Time Server. If
the Network Time Server is not administered:
1. On the left navigation menu, click Server Date/Time .
2. Set the correct date and the correct time. Verify that the time zone is correct.
!
Important:
Important:
If you change the time zone, you must reboot the server. For more information,
Rebooting the server on page 42.
4. Repeat this procedure, beginning with step 1.
5. Verify that the Daylight Savings Rule field is correct.
l
0 if this server is in a location that does not use daylight savings time
display time Page 1 of 1
DATE AND TIME
DATE
Day of the Week: Friday Month: June
Day of the Month: 9
Year: 2006
TIME
Hour: 14 Minute: 19 Second: 36 Type: Standard
Daylight Savings Rule: 0
WARNING: Changing the date or time may impact BCMS, CDR, SCHEDULED