Avaya S8700-Series, Installing And Configuring

Page: 104 / 122

Appendix A: Server access
104 Installing and Configuring the Avaya S8500-Series Server
Customers can set up their own logins to access Avaya servers. You must have superuser
permission to create or change logins and passwords. NOTE: do not start login IDs with a
number. For more information, see the
Avaya Communication Manager Basic Administration
Quick Reference (03-300363).
Configuring the network for Windows 2000 and XP
!
Important:
Important:
Write down the original settings for use in case you need to revert to the original
configuration.
1. On your computer that is connected to the services port, right-click My Network Places
and left-click Properties to display the Network Connections window.
Windows 2000 or Windows XP should automatically detect the Ethernet card in your
system and create a LAN connection. More than one connection might appear.
2. Right-click the correct Local Area Connection and left-click Properties to display the
Local Area Connection Properties dialog box.
3. Select Internet Protocol (TCP/IP) .
4. Click Properties to display the Internet Protocol (TCP/IP) Properties dialog box.
5. On the General tab, select Use the following IP address .
6. Make a note of any IP addresses or other entries that you have to clear. You might need to
restore them later to connect to another network
Enter the following:
l
IP address:
192.11.13.5
l
Subnet mask:
255.255.255.252
7. Select Use the following DNS server addresses . The entries for Preferred DNS server
and Alternate DNS server should both be blank.
8. Click Advanced at the bottom of the dialog box to display the Advanced TCP/IP Settings
dialog box.
9. Click the DNS tab. Ensure no DNS server is administered. The address field should be
blank.
10. Click OK and Close to close all the windows.