Replacing the S8510 server
03-602953 Issue 1 June 2008
11
Figure 1: Avaya S8510 front panel
3. Continue only after the server has powered down and the power-on indicator light (Note 1 in
) is out.
Label and disconnect cabling
Be sure to label and disconnect the following connections:
1. Label and disconnect the power cord(s) from the power supply(ies) at the back of the
server.
2. Label and disconnect the Ethernet cable from the dual NIC at the back of the server.
3. Label and disconnect the power cord from the SAMP at the back of the server.
4. Label and disconnect the USB modem cable from the USB port on the SAMP at the back of
the server.
5. Label and disconnect the LAN connection (if used) from the Ethernet port on the SAMP at
the back of the server.
Figure notes:
1.
Power-on indicator, power button
5.
USB 2.0 connectors
2.
Nonmaskable Interrupt (NMI) button
(disabled)
6.
Video connector (not used)
3.
System identification button (used to
locate equipment within the rack)
7.
Hard disk drives
4.
LCD display (system ID, status
information, and system error
messages)
8.
Slimline CD/DVD drive
0
1
III
hw8510fn LAO 020108
7
1
2
3
4
5
6
8