Avaya QuesCom 400, Installation And Commissioning Manual

Page: 111 / 116

Chapter 11: Common procedures
About this task
The chapter includes common procedures that you use when you install and commission the Avaya
Hospitality Messaging Server 400.
• Starting the Avaya Hospitality Messaging Server 400 server on page 111
• Stopping or restarting the HMS 400 — Full Shutdown on page 112
• Manually starting the Dialogic HMP service on page 114
• Starting the Web Configuration module in the Voice System application on page 114
Starting the Avaya Hospitality Messaging Server 400
server
About this task
Start the Avaya HMS 400 server.
Important:
The HMS 400 cannot answer calls until the HMS400R3 window shows that channels are
ready. When Channels appear in the HMS400R3 window, the HMS 400 is ready to accept
calls.
Prerequisites:
• For more information, see Avaya Hospitality Messaging Server 400 Fundamentals,
NN42350-104 .
Procedure
1. Ensure the HMS 400 server is properly connected to a power source.
2. Push the power button on the front panel of the server.
Windows 2008 Server automatically loads.
3. After Windows 2008 Server starts, the HMS 400 application automatically loads.
4. Wait approximately 5 minutes for HMS 400 to become fully operational. The Dialogic
Services must start before the HMS400R3 application starts.
Avaya Hospitality Messaging Server 400 Installation and Commissioning March 2012 111