Avaya programming and use, Installation And Use Manual, Page: 72 / 468

PARTNER
®
Advanced Communications System Installation, Programming, and Use
Connecting Auxiliary Equipment
2-40
Connecting Auxiliary Equipment
2
You can connect many types of telecommunications devices to your system without expensive
adapters or additional telephone lines—for example, answering machines, credit card scanners,
and fax machines. Many tip/ring, single-line devices work with the system regardless of the
manufacturer. See
Chapter 9, “Using Auxiliary Equipment” for further details about connecting
auxiliary equipment, including voice messaging systems.
8. Place the Autodialer on the desk to the
right of the telephone
(see
Figure 2-37 ).
9. Remove the plastic cover from the
autodialer and label the button sheet
extension numbers and corresponding
persons’ names. Place the button
sheet on the Autodialer, and carefully
replace the plastic cover.
10. Adjust the height of the Autodialer to
match the system telephone.
Figure 2-37. System Telephone and
Intercom Autodialer
If you unplug the telephone
connected to an Autodialer, you
must reset the Autodialer. To do
so, unplug the D8W line cord
(connected to the IN jack on the
bottom of the Autodialer) from
the J1 jack on the adapter; then
plug it back in.
ABC
2
DEF
3
1
JKL
5
MN
O 6 TUV
8
WX YZ
9
0
GHI
4
PQ
RS 7
*
#
Mes
sage
Intercom
Intercom
Ext.
Conf
Tra
nsfr
Mic
HFA
I
Hold
Spk
r
Featu
re