PARTNER
®
Advanced Communications System Installation, Programming, and Use
B. System Specifications
14
Extension Jack
Specifications
(ACS Processor
and 308EC
module)
■
Ringing voltage: +55 VRMS Balanced ringing within a trapezoidal wave
shaping
■
38- to 42-Volt talk battery
■
Ringing frequency: 20 HZ
Extension Jack
Specifications
(012E module)
■
Ringing voltage: +55 VRMS Balanced ringing within a trapezoidal wave
shaping
■
38- to 42-Volt talk battery
■
Ringing frequency: 20 HZ
PAGE Jack
Specifications
■
Draws current on inner wire pair
■
Provides paging contact closure on outer wire pair
■
600 Ohm impedance
Music-on-Hold
Jack
Specifications
■
Accepts 2 Volts at 50 Kohms maximum input
■
0 - 18 dB attenuation
CONTACT
CLOSURE
Adjunct Jack
Specifications
■
Operates up to 150 feet (45.72 meters) from control unit using 24 gauge
solid conductor wire if 2 Contact Closures used; up to 800 feet (243.84
meters) from control unit using 24 gauge solid conductor wire if only 1
Contact Closure used
■
Install the Contact Closure Adjunct in the same building as the control
unit; cannot be installed out-of-doors
■
Has three terminals per Contact Closure, providing a normally open and
normally closed function for each Contact Closure
■
Maximum contact voltages and current:
– 30 VAC, 1 Amp
– 50 VDC, 1 Amp
SMDR Output
Format
■
1200 baud
■
8 data bits
■
XON/XOFF protocol
■
Line feeds
■
No parity
■
2 stop bits
■
Carriage return
Table 3.
Other Specifications—
Continued
Specification
Value