5 Working with Translations
46
Restoring Your Changes to the System
Getting Started
Restoring Your Changes to the System
After you send the translation file to the internal memory of the PARTNER R7.0
processor module or a PC card, that file resides on either the internal memory of
the PARTNER R7.0 processor module or the PC card. This translation file will not
be used by the PARTNER system until you “restore” it to the PARTNER system.
After the restore process is complete, you will be disconnected automatically
from the PARTNER system.
To restore a translation file to the PARTNER system:
1 Make sure you are connected to the PARTNER system. (See
to the PARTNER System” on page 25
2 Perform one of the following steps:
• If you want to restore the translation file from the PC card, select Restore
System Translations from PC Card from the Administration menu.
• If you want to restore the translation file from the internal memory of the
PARTNER R7.0 processor module, select Restore System
Translations from Internal Memory from the Administration menu.
A message box appears stating that the restore has started and that your
connection to the PARTNER system will be disconnected.
3 Click the OK button.
A message box appears stating that your connection to the PARTNER
system was ended.
4 Click the OK button.
When you restore a translation, the PARTNER system will be out of
service for several seconds. Any calls in progress will be terminated
(that is, disconnected). You may want to restore a translation after
business hours.
PCAdminGS.book Page 46 Wednesday, May 19, 2004 1:28 PM
