manualshive.com logo in svg

Avaya PARTNER ACS PC Administration, Getting Started Manual

Share
Download
Avaya PARTNER ACS PC Administration Getting Started Manual Download Page 25

 Overview

25

4 

Connecting to the

PARTNER System

Overview

There are four methods of connecting to a PARTNER system:

• Operator Assisted

Use this method when you are connecting to the PARTNER system via a 
modem, and the PARTNER system does not have an active Automated 
Attendant system or a dedicated line for the external modem or Remote 
Access card.

• Automated Attendant

Use this method when you are connecting to the PARTNER system via a 
modem, and the PARTNER system has:

— an Automated Attendant system turned on

— an external modem (PARTNER ACS R7.0 only) or Remote Access 

card

• Direct  Dial

Use this method when you are connecting to the PARTNER system via a 
modem, and you have administered either of the following for the external 
modem (PARTNER ACS R7.0 only) or Remote Access card:

— An intercom extension (Local Direct Dial)

— A dedicated outside line (Remote Direct Dial)

PCAdminGS.book  Page 25  Wednesday, May 19, 2004  1:28 PM

Summary of Contents for PARTNER ACS PC Administration

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands