4 Connecting to the PARTNER System
Automated Attendant Connection
29
Getting Started
Creating a Hunt Group
To create a Hunt Group while at a PARTNER phone:
1 From extension 10 or 11, press
f00
.
2 Press the left
i
twice.
3 Enter
#505
.
4 At the GROUP: prompt, enter a group number (1-6). We recommend the
number 6.
The following display appears:
HUNT GROUP 6
EXTENSION:
5 Perform one of the following steps:
— If you are using an external modem, enter the extension to which the
modem is connected.
— If you are using a Remote Access card, enter
76
. (This is the
pre-established extension number for your PARTNER Remote Access
card.)
6 Exit programming mode by pressing
f00
.
For more information about Hunt Groups, refer to the PARTNER system
documentation. For more information about the location of special programming
buttons on a PARTNER phone, see the PARTNER system documentation.
PCAdminGS.book Page 29 Wednesday, May 19, 2004 1:28 PM
