manualshive.com logo in svg

Avaya P133G2, Quick Start Manual, Page: 9 / 12

Share
Download
Avaya P133G2 Quick Start Manual Download Page 9

X

If you do not have the Java plug-in installed, follow the instructions on the Welcome
page that offers a variety of options to install the plug-in.

L

If the network manager has configured the system the plug-in should be installed auto-
matically. 
If the plug-in is not installed automatically,  there are three ways to install the plug-in
manually:

•  Either install the plug-in from the CD as follows:

1. Close all unnecessary applications on your PC.
2.Insert the “Avaya P130 Documentation and Utilities” CD in the CD drive.
3.Click Start on the Task bar.
4.Select Run.
5.Type 

x:\emweb-aux-files\plugin_1_2_2.exe

(where 

x:

is the CD drive letter)

6.Follow the on-screen instructions.

•  Or install the plug-in from the Web site by clicking on the link on the welcome page.
•  Or, if the network manager has placed the files on the local site, install the plug-in from

there by clicking the link on the welcome page.

X

If you have the Java plug-in already installed or once you have successfully installed the
plug-in as described above, the Web-based manager opens in your browser.

6

Summary of Contents for P133G2













Reviews:

No comments