background image

Line/Field

Description

Associated system parameter

4 = AES-CBC-192

5 = AES-CBC-256

6 = Null

IPsec Authentication Alg

The authentication algorithm to
propose for use during IKE Phase
2 negotiation. Values are:

0 = Any

1 = MD5

2 = SHA

NVIKEP2AUTHALG

Protected Network

Specifies the IP address range
that will use the VPN tunnel.
Pressing Change brings up the
VPN Text Entry screen so that you
can enter a new IP address.

If a list, the (first) value of
NVIPSECSUBNET

IKE over TCP

This field displays only if your VPN
meets the conditions for displaying
IKE Over TCP. Specifies whether
and when to use TCP as a
transport protocol for IKE.

NVIKEOVERTCP

IKE over TCP screen field descriptions

If the IKE over TCP (NVIKEOVERTCP) value is:

This description displays:

0

Never use TCP as a transport protocol form IKE.

1

Auto; IKE over UDP is tried first; if not successful,
IKE over TCP is used.

2

Always use TCP as the transport protocol for IKE.

VPN text entry screen

Procedure

1. Select a text value.

2. Touch or press 

Change

.

The VPN Text Entry screen displays the current setting and a blank area for you to enter the
new setting

3. Use the dialpad to enter text, as you would on a cellular phone.

Changing VPN settings

32

     VPN Setup Guide for 9600 Series IP Telephones

March 2015

Comments? [email protected]

Summary of Contents for one-X 9600 Series


































































Reviews: