Interface Control
Issue 1 June 2007
85
11. Press the
#
button to save the new values you entered.
The telephone displays:
Once the new values are stored, the telephone is reset.
If a new boot program is downloaded from the HTTP server after you enter static
addressing information, you must reenter your static addressing information.
Disable/Enable Event Logging
Use the following procedure to enable or disable logging of system events.
1. While the telephone is on-hook and idle, press the following sequence of keys on the
faceplate of the telephone:
Mute 5 6 4 # (Mute L O G #)
Note:
Note:
Press the
Mute
button momentarily. Do not press this button while pressing other
keys/buttons.
2. After entry of the command sequence, the telephone displays the following text, depending
on the current value of the system parameter NVLOGSTAT:
where
status
is the type of logging indicated by the NVLOGSTAT value, defined as:
●
Status is
disabled
when NVLOGSTAT = 0
●
Status is
emergencies
when NVLOGSTAT = 1
●
Status is
alerts
when NVLOGSTAT = 2
●
Status is
critical
when NVLOGSTAT = 3
●
Status is
errors
when NVLOGSTAT = 4
●
Status is
warnings
when NVLOGSTAT = 5
●
Status is
notices
when NVLOGSTAT = 6
●
Status is
information
when NVLOGSTAT = 7
●
Status is
debug
when NVLOGSTAT = 8
New values
being saved
Log=
status
*=change #=OK
