Avaya Norstar T7316E, User Manual, Page: 64 / 86

T7316E Telephone User Guide Page 64
- Issue 02a (03 October 2011) IP Office
11. Phone Settings
11.1 Contrast
You can change the contrast on the phone display.
1. Press Feature *7.
2. Use the number keys to select the required contrast. Alternatively, use the and buttons to change the
contrast.
3. The function will automatically cancel after a 3 seconds.
11.2 Ringer Sound
You can change the ringer sound. This does not change the ring pattern which is controlled by the telephone system.
1. Press Feature *6.
2. Press 1 to 4 to select the required ringer sound.
·
Whilst the function is active, you can also use the and buttons to change the ringer volume.
3. The function will automatically cancel after a 5 seconds.
11.3 Ringer Volume
You can change the ringer volume using the following process. You can also adjust the volume while a call is ringing your
phone.
1. Press Feature *80. The phone will start a continuous ring.
2. Use the soft and loud volume buttons to change the volume to the level required.
3. The function will automatically cancel after a 5 seconds.
11.4 Enbloc Pre-Dialing
You can enable or disable your enbloc pre-dialing using Feature 82. When on, you can compose a number to dial
without the digits being dialed until the number is complete.
·
This function can be assigned to a programmable button . This allows it to be accessed in a single key press. If
the button includes an indicator, it will indicate the status of the function (on or off).
1. Press Feature *82.
2. The phone displays Enbloc dial and the current setting.
3. Press the on or off soft key to change the setting.
20
69