manualshive.com logo in svg

Avaya Media Gateway G350, Installation Manual, Page: 11 / 60

Share
Download
Avaya Media Gateway G350 Installation Manual Download Page 11

About this book

Related resources

Installation of the G350 Media Gateway

11

December 2003

Related resources

For more information on the Avaya G350 Media Gateway and related features, see the following books:

Technical assistance

Avaya provides the following resources for technical assistance.

Within the US

For help with:

•

Feature administration and system applications, call the Avaya Technical Consulting Support 
System at
1-800-225-7585

•

Maintenance and repair, call the Avaya National Customer Care Support Line at
1-800-242-2121

•

Toll fraud, call Avaya Toll Fraud Intervention at 1-800-643-2353

International

For all international resources, contact your local Avaya authorized dealer. 

Trademarks

All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of Avaya Inc. 
All other trademarks are the property of their respective owners.

Title

Number

Overview of the Avaya G350 Media Gateway

555-245-201

Upgrade and Service Guide for the Avaya G350 Media Gateway 

555-245-106

Avaya G350 Media Gateway Glossary

555-245-301

Summary of Contents for Media Gateway G350





























































Reviews:

No comments