Avaya LUPCMALL, Installation And Use Manual, Page: 17 / 68

[17]
5.7. Override Input
The Override is a non-programmable feature that lets the caller take priority over all paging functions and make a system-
wide page to all speakers. The feature can be activated using a loop start trunk or dedicated telephone. Provisions are also
included to interface with other signaling equipment.
The Override feature includes a quad beep pre-announce tone that can be enabled or inhibited. (The default is inhibited). See
System Programming , Section 11 to enable the tone.
1. Make sure that power is off and all connections completed before proceeding.
2. Plug modular cord into OVERRIDE (RJ-11) jack.
The center two conductors interface directly to a Loop Start Trunk or dedicated phone (see
Figure 5-10). When the trunk becomes active, the PCM goes into Override mode.
Also, see Connecting to an External Audio Source , page 53.
Figure 5-10: Override Loop Start
RJ11 Connections