Avaya J159 Page 143 User Manual Download

Page: 143 / 149

Viewing Avaya Mentor videos

Avaya Mentor videos provide technical content on how to install, configure, and troubleshoot
Avaya products.

About this task

Videos are available on the Avaya Support website, listed under the video document type, and on

the Avaya-run channel on YouTube.

• To find videos on the Avaya Support website, go to

https://support.avaya.com/

and do one of

the following:

- In

Search

, type

Avaya Mentor Videos

, click

Clear All

and select

Video

in the

Content

Type

- In

Search

, type the product name. On the Search Results page, click

Clear All

and select

Video

in the

Content Type

The

Video

content type is displayed only when videos are available for that product.

In the right pane, the page displays a list of available videos.

• To find the Avaya Mentor videos on YouTube, go to

www.youtube.com/AvayaMentor

and do

one of the following:

- Enter a key word or key words in the

Search Channel

to search for a specific product or

topic.

- Scroll down Playlists, and click a topic name to see the list of videos available for the topic.

For example, Contact Centers.

Note:

Videos are not available for all products.

Support

Go to the Avaya Support website at

https://support.avaya.com

for the most up-to-date

documentation, product notices, and knowledge articles. You can also search for release notes,

downloads, and resolutions to issues. Use the online service request system to create a service

request. Chat with live agents to get answers to questions, or request an agent to connect you to a

support team if an issue requires additional expertise.

Viewing Avaya Mentor videos

April 2020

Using Avaya J159 IP Phone in an Open SIP environment

143

Comments on this document? [email protected]

Summary of Contents for J159






















































































































































Search results

Summary of Contents for J159

Reviews:

Related manuals for J159

Brands by name

Popular brands

Avaya J159, User Manual

Search results

Summary of Contents for J159

Reviews:

Related manuals for J159

Brands by name

Popular brands