Avaya J139 Using Manual Download Page 53

Page: 53 / 143

DND icons

on page 53

DND icons

The following table displays the DND icons for the Avaya J100 Series IP Phones.

State

Phone icons

DND

DND ring reminder

on page 52

Activating the ring reminder

About this task

Note:

Ring Reminder is available only in BroadSoft environment.

Procedure

1. Press

Main menu

2. Scroll to

Features

, and press one of the following:

•

Select

•

• The corresponding line key

3. Scroll to

DND

feature, and press

Config

4. For the

Ring reminder

setting, press

Toggle

to activate the ring reminder.

5. Press

Save

Related links

Do not disturb

on page 52

Call forwarding

With the Call forwarding feature, you can divert incoming calls to another number.

The phone supports the following Call forward types:

• Call forward: Diverts all incoming calls to another number.

Call forwarding

December 2021

Using Avaya J139 SIP IP Phone in Open SIP

Comments on this document? [email protected]

Summary of Contents for J139
















































































































































Search results

Summary of Contents for J139

Reviews:

Related manuals for J139

Brands by name

Popular brands

Avaya J139, Using Manual

Search results

Summary of Contents for J139

Reviews:

Related manuals for J139

Brands by name

Popular brands