H.323 Telephone Installation
Page 70
15-601046 Issue 17e (Wednesday, November 14, 2012)
IP Office
3.3 Self-Test Procedure
1600, 4600 and 5600 Series Phones
1. To start the IP phone self-test procedure, press the following sequence: MUTE 8 3 7 8 # (MUTE T E S T #). The
phone does the following:
·
Each column of programmable button LEDs is lit for half a second from left to right across the phone, in a
repeating cycle. The Speaker/Mute LED and the message waiting LED are also lit in sequence.
·
Buttons (other than #) generate a click if pressed.
·
Phones with displays show Self test #=end for one (1) second after self-test is started. Then a block
character (all pixels on) is displayed in all display character locations for five (5) seconds. Display of the block
character is used to find bad display pixels.
2. One of the following is finally displayed:
·
If self-test passes:
Self test passed
#=end
·
If self-test fails:
Self test failed
#=end
3. To end the self-test, press #. The phone returns to normal operation.
9600 Series Phones
1. While the phone is on-hook and idle, press the following sequence: MUTE 2 7 2 3 8 # (MUTE C R A F T #).
2.Scroll the menu to Test.
3.Press Test again to confirm the action.
