You can configure manual or automatic provisioning for the phones. For more information, see
Configuring the phone using the DHCP or static provisioning server
on page 42.
Auto provision page
To access this page, click the
System
tab and then click
Auto Provision
.
From this page, you can deploy and manage the devices in bulk. You can also use this page to
define the method to use for obtaining the configuration file, as described in
on page 42.
Tools page
To access this page, click the
System
tab and then click
Tools
. From this page, you can set up
settings to identify issues at troubleshooting, and reboot the phone.
Enabling syslog
About this task
Use this procedure to enable syslog. Enabling syslog for the phone sents syslog message to the
syslog server. Syslog is used for system management, security auditing, general analysis, and
debugging messages.
Procedure
1. On the web portal, navigate to
System
>
Tools
>
Syslog
.
2. Select the
Enable Syslog
checkbox.
3. In
Server Address
field, enter the server IP address.
4. In
Server Port
field, enter the port number.
5. From
APP Log Level
drop down, select the appropriate option.
6. From
SIP Log Level
drop down, select the appropriate option.
7. Click
Apply
.
Enabling watch dog
About this task
Use this procedure to automatically restart due to unrecoverable software errors. By default, this
option is enabled.
Procedure
1. On the web portal, navigate to
System
>
Tools
>
Syslog
.
2. Select the
Enable Watch Dog
checkbox.
Web portal navigation
October 2019
Installing and Administering the Avaya H239 and H249 Phones
18
