Powering up the digital phone by using the Y-Adapter with
GSPPoE
About this task
Use this procedure to turn on the digital phone by using the Y-Adapter with GSPPoE. What is used
to turn on Avaya 1400, 2400, 9400, and 9500 series DCP phones with button modules. The
1151C1 is no longer available. Y-Adapter Kit contains one Y-Adapter, one CAT-3 cable, and an
instruction sheet.
Procedure
1. Connect the phone-out port of the GSPPoE (
) to the 48 V port of the Y-Adapter by
using the CAT-3 cable.
2. Connect the phone jack of the Y-Adapter (
) to a DCP phone by using the CAT-5E
cable.
3. Connect the pigtail of the Y-Adapter to the digital port.
GSPPoE
CAT- 3
CAT-5E
Figure 2: Connection diagram
Note:
The Y-Adapter can also be used with legacy DCP phones, BRI phones, and DCP
phones without button modules.
Powering up the digital phone by using the Y-Adapter with GSPPoE
June 2018
Using Avaya Global Single Port Power Over Ethernet Injector
9