Avaya G700 Installing And Upgrading Download

Page: 69 / 808

About hardware components

Issue 10.2 May 2007

Chapter 2: Hardware installation for the G700 Media

Gateway and S8300 Media Server

Configurations using the G700 media gateway consist of three main elements:

●

G700 Media Gateway

●

S8300, S8400, S8500, or S8700/S8710/S8720 Media Server

●

Avaya Communication Manager software

The chapter is organized in two main sections:

●

About hardware components

- Describes the G700 and S8300 components.

●

About installation and cabling

- Provides hardware installation and cabling procedures.

Note:

Note:

See

Quick Start for Hardware Installation: Avaya S8300 Media Server and Avaya

G700 Media Gateway

, 555-233-150, for an overview of the G700 hardware and

cabling.

About hardware components

This section describes the components of an Avaya G700 Media Gateway and an Avaya S8300
Media Server.

What are the main elements of the G700 media gateway

The main elements of a G700 Media Gateway are:

●

G700 chassis and processors

●

Media modules

●

Avaya Data Expansion Modules

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for G700

Reviews:

Related manuals for G700

Brands by name

Popular brands

Avaya G700, Installing And Upgrading

Search results

Summary of Contents for G700

Reviews:

Related manuals for G700

Brands by name

Popular brands