manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 443 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 443

Install the S8300

Issue 10.2 May 2007

443

 

4. Select "Install the Authentication file I previously downloaded" and click 

Install

.

The system tells you the authentication is installed successfully

If the authentication file does not install, you may need to add a super-user login first. See 

Creating a super-user login, if necessary, for R4.0 or higher

on page 424.

If the server is an LSP, stop and start Communication Manager

If you are upgrading an LSP, you must restart Communication Manager to sync the license for 
LSP status.

1. Access the server’s command line interface using an SSH client, like PuTTY, and an IP 

address of 

192.11.13.6

.

2. Type 

stop -caf

3. Type

 start -ca

Installing security files and Communication Manager service 
packs, if any

To install security files and/or service packs

1. Under Server Upgrades, select 

Manage Updates

.

The 

Manage Updates 

screen appears.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments