Avaya G700 Installing And Upgrading Download Page 428

Page: 428 / 808

Manual installation of a new G700 with an S8300

428 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

Configuring the S8300

To configure the S8300 server using the Maintenance Web Interface

CAUTION:

CAUTION:

For a new installation, be sure you have set the time and timezone before
proceeding. Failure to do so may cause network problems later.

1. On the S8300 Web page main menu, click on

Configure Server

under Server

Configuration and Upgrade. The system displays the

Configure Server

screen.

Configure Server Screen

2. Click

Continue

The system displays the

Back Up Data Notice

screen. Do one of the following options:

- For a new installation, a backup at this point is unnecessary. Perform a backup after

the installation.

- For an upgrade, perform the backup, as described in

To back up the system to

compact flash media (S8300C Media Server only)

on page 492.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for G700

Reviews:

Avaya G700, Installing And Upgrading, Page: 428 / 808

Search results

Summary of Contents for G700

Reviews: