manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 261 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 261

On-site Preparation for the Upgrade

Issue 10.2 May 2007

261

 

Completing pre-upgrade tasks — If the target S8300 is the primary 
controller

If the S8300 is configured as an LSP, skip to 

Run the Upgrade Tool to upgrade the primary 

controller, LSPs, and G700 media gateways

on page 281.

!

CAUTION:

CAUTION:

If you are upgrading an S8300 primary controller that has LSPs registered to it, 
the LSPs must be upgraded 

before

 the primary controller. (You can use the SAT 

command, 

list media-gateway

, to see if there are LSPs registered to the 

S8300.)

Perform the following procedures if you are upgrading an S8300 that is configured as a primary 
controller:

●

To clear alarms

●

To check link status

●

To record all busyouts

●

To disable scheduled maintenance

●

To check for translation corruption

●

To save translations

●

To disable alarm origination

Note:

Note:

It is no longer necessary to disable Terminal Translation Initialization (TTI) before 
an upgrade or to enable it after an upgrade.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments