54
Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Customize the Active Media Server
May 2003
Customize the Active Media
Server
For SAT commands, use a terminal emulation application, such as Avaya™ Terminal Emulator
or HyperTerminal. You can also use Avaya Site Administration, part of the Avaya™ VisAbility
Suite, which you can purchase from Avaya.
NOTE:
You must use Release 1.11 or a later version of Avaya Site Administration to be able to
administer new features in Release 1.3 of Avaya™ Communication Manager.
NOTE:
For SAT commands you must be on the active media server.
List of Tasks:
•
‘‘Start terminal emulation’’ on page 54
•
‘‘Input translations’’ on page 55
•
‘‘Reset media server’’ on page 55
•
‘‘Add media gateways’’ on page 55
•
‘‘Administer and enable the IP Server Interface’’ on page 56
•
‘‘Add IPSI translations to Communication Manager’’ on page 57
Start terminal emulation
NOTE:
Avaya™ Terminal Emulation and HyperTerminal are supported terminal emulation
applications. Terranova is not supported.
1
On the services laptop open a VT-100 terminal emulation session using an application
such as Avaya Terminal Emulation.
2
Administer the terminal emulation port settings:
•
9600 baud
•
No parity
•
8 data bits
•
1 stop bit
•
No flow control
3
Log into the active media server as craft.
