Avaya G450 Manager, Cli Reference Manual

Page: 984 / 1334

CLI Commands SLS survivability
984 Avaya G450 CLI Reference
Parameters
User Level
read-write
Context
sls > incoming-routing
Examples
To insert the digits "9719" to the dialed string:
G450-001(sls-dial-pattern <dialed-string>)# set insert-digits 9719
To remove the digit-treatment (removes data administered with set insert-digits
(incoming-routing) ):
G450-001(sls-dial-pattern <dialed-string>)# set insert-digits ""
Related Commands
clear incoming-routing , incoming-routing , set delete-digits , set length , set match-pattern , set sls ,
show (incoming-routing) , show incoming-routing , show sls , sls
set length
Use the
set length
command to specify the length of the dialed string in SLS.
Note:
Note:
There is an actual service offered in some public networks, such as in Japan,
where the ISDN Called Party Number IE's 'Number Digits' table entry in octet 4
has no information. In order to program the Incoming Routing Table to handle this
case, the
pattern
field in
set match-pattern
should be set to "", and the
length
field in
set length
should be set to "0". This indicates that there has
been a successful match, and that the
digits
field in
set insert-digits
will
be used to provide the destination number so that the SLS dial plan may route
this incoming call.
Syntax
set length length
Parameter Description Possible
Values Default
Value
digits
0-16 digits/special characters to insert at
the beginning of the dialed string " " (no digits inserted)
0-9 plus ’ * ’ and ’ # ’
" "